Home > Products > DIY Creator Kits > Tech Specs
Jump to:

The Fine Details About Our Urethane Rails

Creator Kits allow you the freedom to design and assemble your own unique multi-directional balance board. We supply the parts and you inspire the builder within.

Urethane Rail:

  • Solid construction with no voids or recesses.
  • Extremely durable to abrasion and rough surfaces compared to plastic materials.
  • 1" thick by 1" height.
  • Rigid hardness with slight flexibility for stability and contouring to your board.
  • Rail connects with a male/female locking design.
  • Nuts are secured deep into the rail to avoid contact with the ground.
  • Design allows some variability to the nut and bolt placement if you drilled slightly off your mark.
  • Rail can be expanded in length by 4". Several extension pieces can be used.
  • Slight taper at the top to soften the feel of the ball against the rail compared to a sharp rectangular edge.

Skate Kit:
This rail is attached to the kids Kick Start board.

  • 12.25” x 6.25” horseshoe urethane ends
  • 4" urethane extensions
  • 8 Phillips flat head machine screws 3/16" x 1" x 10-32 threading for countersinking
  • 8 nylon insert locking nuts
  • 3" solid urethane Mini ball
  • Assembly instructions

Starter Kit:
This rail is attached to all Starter boards.

  • 16” x 9.5” horseshoe urethane ends
  • 4" urethane extensions
  • 8 Phillips flat head machine screws 3/16" x 1 1/4" x 10-32 threading for countersinking
  • 8 nylon insert locking nuts
  • 3" solid urethane Mini ball
  • Assembly instructions